[Bldg-sim] Peak Cooling Load

[Sajid Thekke Poolakkool]

Hi

 

To view building HVAC peak load summary , refer to SS-D report. If you
want to get the peak cooling load refer this report. 

 

 

SS- A report give us  system load summary , ( I don't how you input data
for the system in wizard/ DD).

 

 

 

 

SAJID   T  P

H V A C Engineer

 

From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Rathna
Shree
Sent: Thursday, August 20, 2009 8:35 AM
To: John Aulbach; bldg
Subject: Re: [Bldg-sim] Peak Cooling Load

 

Mr. John,

 

Thank you for the reply. I have mentioned the design cooling people,
lights, equipment, etc precisely for the projects. And also, if the peak
load shown is not correct then we cannot use visual doe for sizing the
equipment in the preliminary stage of the design. Is my understanding
correct? Which report do we have to refer, to get the peak cooling load
of the building?

 

Thank you in advance.

 

Regards,

Rathna shree

--- On Mon, 17/8/09, John Aulbach <jra_sac at yahoo.com> wrote:

	
	From: John Aulbach <jra_sac at yahoo.com>
	Subject: Re: [Bldg-sim] Peak Cooling Load
	To: bldg-sim at lists.onebuilding.org, "Rathna Shree"
<rathnashreep at yahoo.in>
	Date: Monday, 17 August, 2009, 5:28 PM

	Rathna:
	
	The SS-A Peak Cooling is, of course, for the individual systems
within a building. They are usually quite low as one does not usually
specify the design cooling people, lights, equipment, etc in an energy
model, which is what eQuest and Visual DOE represent.
	
	You are also not having the peak internal loads coincide with
each other and with the peak external cooling load.
	
	I believe others on this forum can share similar experiences.
	
	John R. Aulbach
	
	--- On Mon, 8/17/09, Rathna Shree <rathnashreep at yahoo.in
<http://in.mc951.mail.yahoo.com/mc/compose?to=rathnashreep@yahoo.in> >
wrote:
	
	> From: Rathna Shree <rathnashreep at yahoo.in
<http://in.mc951.mail.yahoo.com/mc/compose?to=rathnashreep@yahoo..in> >
	> Subject: [Bldg-sim] Peak Cooling Load
	> To: bldg-sim at lists.onebuilding.org
<http://in.mc951.mail.yahoo.com/mc/compose?to=bldg-sim@lists.onebuilding
.org> 
	> Date: Monday, August 17, 2009, 2:14 AM
	> 
	> Hi all,
	>  
	> I am a new member of the group. I work on visualdoe
	> and Equest softwares. I have a basic question with
	> reference to the peak cooling load. 
	> The Peak cooling load is very less
	> when compared to the cooling capacity of the system (by more
	> than 50%) in some of the projects.. What is the reason for
	> this? I am checking the Peak cooling load in SS-A
	> report.
	>  
	> Thanks in advance.
	>  
	> Regards,
	> Rathnashree
	> 
	> 
	> 
	> 
	>        Looking for local information? Find it
	> on 
	> Yahoo! Local
	> -----Inline Attachment Follows-----
	> 
	> _______________________________________________
	> Bldg-sim mailing list
	>
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
	> To unsubscribe from this mailing list send  a blank
	> message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
<http://in.mc951.mail.yahoo.com/mc/compose?to=BLDG-SIM-UNSUBSCRIBE@ONEBU
ILDING.ORG> 
	> 
	
	
	

 

________________________________

Looking for local information? Find it on Yahoo! Local
<http://in.rd.yahoo.com/tagline_local_1/*http:/in.local.yahoo.com/> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20090820/a2bea022/attachment-0002.htm>