[Bldg-sim] course material

[Andrew Craig]

Although slightly outdated, the easiest and most comprehensive tutorial
is probably the one located on the eQUEST website:
http://www.doe2.com/equest

Just scroll down the page a little bit and you will find the file.

Good luck.

 

Please note my new e-mail address: andrewc at interfaceeng.com

Andrew Craig, EIT,LEED AP/ Mechanical Designer/ Energy Analyst
INTERFACE ENGINEERING 
direct 503.382.2696 

________________________________

From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Abaza
Hussein
Sent: Tuesday, February 24, 2009 4:48 PM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] course material

 

I am trying to introduce E-quest to my students. I will appreciate any
information about a self guided tutorial . This should be a short
tutorial.

Thank you

H. Abaza

SPSU

 

 

________________________________

From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Don
Lipinski
Sent: Tuesday, February 24, 2009 7:14 PM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Modeling Self Contained DX AHUs (Water Cooled)

 

Does anybody know the best way to model an AHU with internal compressor
that is water cooled with an external tower?  The AHU sits in a
insulated mechanical room with return air and OA dumped directly into
the Mech room.  I know eQuest has the capability to do this, however you
do not have the ability to choose whether the VAVs are parallel or
series boxes.   So I started a model in VisualDOE, and I think the water
loop heat pump is the closest VisualDOE can get to this system, however
I would like to see if anyone has successfully modeled this type of
system. 

 

thanks, 

Don Lipinski, PE

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20090224/5aaabfa5/attachment-0002.htm>