[Bldg-sim] Oversized Chiller
Jill Dalglish
Jill at ambient-e.com
Tue Jan 13 11:06:12 PST 2009
Hello,
I have seen a few prior posts regarding eQuest oversizing a chiller
where the chiller runs only in the lower part-loads (in my case up to
50%) even though it appears through the inputs that eQuest should be
autosizing the chiller. I have not see answers or solutions to this
problem. Has anyone out there figured this out yet?
Thanks,
Jill
Jill Dalglish, LEED-AP
130 W. 5th Avenue, Denver, CO 80204
(NOTE NEW ADDRESS)
t 303.278.1532x205 | f 303.278.8533 | ambient-e.com
<http://www.ambient-e.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20090113/f579f6ff/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 4935 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20090113/f579f6ff/attachment.jpeg>
More information about the Bldg-sim
mailing list