[Bldg-sim] Demand ratchets on sub meters

[Jill Dalglish]

Hello,

 

I am modeling two separate buildings in eQuest in one model and need to
apply an electrical coincident demand ratchet to each separately? The
coincident demand ratchet is different from the facility demand ratchet
in that the times of the coincident demand are set by the utility
whereas the facility demand ratchet is just whenever the building peaks.


 

I have set up and applied this coincident demand to the main electrical
meter and have set up submeters for the two buildings but don't know if
eQuest can apply this ratchet to the submeters. 

 

Thanks in advance for your help!

Jill

 

 

 

Jill Dalglish, LEED-AP

130 W. 5th Avenue, Denver, CO 80204 

(NOTE NEW ADDRESS)

t 303.278.1532x205 | f 303.278.8533 | ambient-e.com
<http://www.ambient-e.com> 

 

 

 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20090115/052c2278/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 4935 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20090115/052c2278/attachment.jpeg>