[Bldg-sim] eQuest : How to Save Results to xls

[Ryan Schmidt]

Regarding the output file being generated in .xls, I am not sure.

To save in .xls you can always follow these steps:

1) Copy the .sim file text and paste into simple word editor such as
Notepad. Save the file as a .dat.
2) Open Excel and import data from .dat file.

Hope this was not the obvious answer you are trying to avoid.

Thanks,

Ryan Schmidt


-----Original Message-----
From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Neetu Singh
Sent: Friday, July 31, 2009 10:28 AM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] eQuest : How to Save Results to xls

Hi All,

I was wondering if anyone can give me some guidance upon saving results
in
xls from .sim output file. 
My problem: Is it possible to output meter data to xls format from
eQuest.
Also can parts of the .sim file be generated in xls format?
If I were to take the current xls report that eQuest generates, it does
not
have meter data say a chilled water meter or so, I wanted to know where
is
all this being set up.

I appreciate any help that I can get on this.

Thanks 
Neetu


Neetu Singh, LEED AP
The Green Engineer, LLP
Sustainable Design Consulting
50 Beharrell Street
Concord, MA 01742
t: 978.369.8978
neetu at greenengineer.com
www.greenengineer.com



_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG