[Bldg-sim] Bldg-sim Digest, Vol 19, Issue 20

Shariq_Ali at URSCorp.com Shariq_Ali at URSCorp.com
Tue Jun 23 12:31:46 PDT 2009



Robby - the fans must cycle with occupancy, and then when the space is not
occupied the must cycle with load. They can not cycle with load only. For
Mike Kennedy's system he would need to model the baseline with VAV heating
and cooling. And also model the same system in the proposed, however you
could set the heating coil capacities to zero, not create a heating plant,
or not assign any systems to the heating plant for the VAV system. (This is
if you are using Trace 700).

Good luck.


-Shariq Ali



                                                                              
 This e-mail and any attachments contain URS Corporation confidential         
 information that may be proprietary or privileged. If you receive this       
 message in error or are not the intended recipient, you should not retain,   
 distribute, disclose or use any of this information and you should destroy   
 the e-mail and any attachments or copies.                                    
                                                                              



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20090623/fb0f5d0c/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: C9786943.jpg
Type: image/jpeg
Size: 59935 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20090623/fb0f5d0c/attachment.jpg>


More information about the Bldg-sim mailing list