[Bldg-sim] Weather data generator software

Joe Huang joe at drawbdl.com
Thu Mar 5 14:20:20 PST 2009


Zhoulun,

Are you wanting to take one day's hourly data and then repeat them to
create an artificial month of data ? Most simulation programs have
weather utility programs that will take your data and convert it to the
format required
by their program.The trickiest part of the problem is that you rarely
have all the right parameters for the data,
and need to do psychrometric conversions to wet bulb, absolute humidity,
etc., so it's best to let these utility
programs figure them out. DOE-2 accepts only full year weather files. I
believe EnergyPlus will accept partial
year data.

Joe Huang
White Box Technologies

Zhuolun Chen wrote:
> Hi,
> I am trying to use daily or weekly weather data to generate weather
> files for energy simulation. For example, I have one-day hourly data
> from the weather station (like dry dulb temperature, RH, global solar
> radiation, wind velocity and direction etc.), and want to develop
> those data to a monthly data set.
> I wonder whether there are some software which can do this work? I
> have tried Meteonorm 5.1 and found that it can only develop the
> monthly data to annual data set.
> Any comments or suggestions are highly appreciated. Thanks!
> Best wishes,
> Zhuolun Chen
> Building System Program
> Department of Civil, Environmental and Architectural Engineering
> University of Colorado at Boulder
> USA
> ------------------------------------------------------------------------
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>   




More information about the Bldg-sim mailing list