[Bldg-sim] Hotel buildings
Brahme, Rohini UTRC
BrahmeR at utrc.utc.com
Tue May 12 04:24:21 PDT 2009
Are these numbers from the BEPS report? If you check the SS-D report,
you will probably find that the cooling is higher than heating. The
cooling in BEPS report will be 1/3-1/4th of the actual cooling load
depending on the COP of your cooling device.
-Rohini
-----Original Message-----
From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Kapil
Upadhyay
Sent: Monday, May 11, 2009 6:21 PM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Hotel buildings
Dear All,
I wanted a quick opinion from some of you who have worked with hotel
buildings.
Do these generally require similar heating and cooling energy?
I was surprised to find this happening for Houston, TX, following 90.1
schedules and other protocol. I tried it with a more temprate climate
but with similar results. The WWAR on the building is at 16%.
Thanks,
Kapil.
Kirksey
Houston, TX
_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
More information about the Bldg-sim
mailing list