[Bldg-sim] eQuest - ASHRAE Window Standars
Nick Caton
ncaton at smithboucher.com
Fri Apr 16 09:44:11 PDT 2010
Katherine,
There was a very lengthy discussion this week (perhaps misleading
entitled "easy question") on this topic which I think will completely
answer your question if you'll plug through it. I've copied it below as
it's not yet in the archives ;).
I personally choose to always use the actual window layout in both
models as a matter of time-efficiency (you have to plug it in once
anyway), provided the overall glazing percentage is less than 40%.
Without taking any sides, I'll share my general perspective - disregard
it if you wish: In my experience, time invested in more accurately
modeling system/envelope behaviors generally tends to yield better
baseline performances. Taking the alternative approach of exploiting
the more hazily written passages of 90.1 to yield similar performance
improvements may be harder to justify later on.
~Nick
NICK CATON, E.I.T.
PROJECT ENGINEER
25501 west valley parkway
olathe ks 66061
direct 913 344.0036
fax 913 345.0617
Check out our new web-site @ www.smithboucher.com
From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Katherine
Louman-Gardiner
Sent: Friday, April 16, 2010 11:27 AM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] eQuest - ASHRAE Window Standars
Hi
I'm in the process of building an eQuest model to compare to an AHRAE
one.
According to the ASHRAE guidelines, windows must be distributed evenly
along each of the four sides of the building. Our building is a complex
structure, with very different heating zones. (We have a large garage
that will not be heated/cooled to the same temperature as the adjacent
office space).
It seems like we will gain an advantage when comparing our proposed
design to the ASHRAE one, by putting windows in an area that won't be
heated as much. Has anyone encountered a similar situation? How did
you deal with it?
Thank you,
Katherine Louman-Gardiner
Mechanical Engineer in Training
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100416/992c5b08/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1459 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100416/992c5b08/attachment-0001.jpeg>
More information about the Bldg-sim
mailing list