[Bldg-sim] Process loads < 25%

Sami, Vikram Vikram.Sami at perkinswill.com
Thu Aug 26 10:58:00 PDT 2010


I would recommend documenting what your modeled process loads (w/ft2, kW etc) are and adding the schedules applied to it as part of the documentation.

They are just looking to make sure that you have modeled it realistically. 11% does seem low, but it depends on the building function.

Vikram Sami, LEED AP
Sustainable Design Analyst
1382 Peachtree St. NE, Atlanta, GA 30309
t: 404-443-7462    f: 404.892.5823       e: vikram.sami at perkinswill.com   www.perkinswill.com<http://www.perkinswill.com/>
Perkins+Will.  Ideas + buildings that honor the broader goals of society


From: bldg-sim-bounces at lists.onebuilding.org [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of amit bhansali
Sent: Thursday, August 26, 2010 10:53 AM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Process loads < 25%

Hello Bldg-Sim subscribers,
I have modeled a 4 story building in Trace for a LEED project. Our process energy in total amounts to only 11% of the Proposed Energy Cost for the year. When entering this information at leedonline in Minimum Energy Performance compliance form, the form says "NO" in the end that we have not complied with minimum energy performance pre-requisites which i think is because of the Process energy being less than 25%. The credit mentions that you could add a document why the process energy for any given project is under 25%.
I would like to ask you all if any of you have successfully entered that information and if yes, where? Also, does adding the document makes the compliance form say "YES" in the end?

Any help would be greatly appreciated.

--
Thanks

Sincerely,
Amit Bhansali, M.S. , EIT
Command Commissioning, LLC
8410, Sterling St
Irving, TX  75063

Office :(972)-929-1199 (Ext:328)
 Mobile: (+1)972-207-5180
             (+1)405-312-1047

www.command-cx.com<http://www.command-cx.com>
www.godparents.in<http://www.godparents.in>
Please do not print this e-mail unless necessary

This email and any files transmitted with it are confidential and intended solely for the addressee. If you are not the named addressee you should not disseminate, distribute, copy, or alter this email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100826/e054b371/attachment-0002.htm>


More information about the Bldg-sim mailing list