[Bldg-sim] LEED CS EA C1 Optimize Energy Performance calculation

ashu gupta kce2 at kamalcogentenergy.com
Mon May 10 01:08:51 PDT 2010


Dear Folks.

 

As we know that the minimum two points are mandatory for projects registered
after June 26, 2007 which is 14% for new construction type in Core & Shell.

 

As per my understanding, to achieve minimum two points 14% savings vis-a-vis
Whole Building Load is required but recently there has been a change and we
found information (attached) and a excel spreadsheet tool which shows that
to achieve the minimum two point, 14% savings of Core & Shell Building Load
is required and minimum in our case two points can be achieved by only 5%
savings of whole building load if 25% of Energy Cost Influenced or Directly
Controlled by CS Owner/Developer. 

 

Thus, can someone please confirm that if we achieved the 5% savings of Whole
Building Load then we qualify as per this new info?

 

Any suggestions would be greatly appreciated!

 

Regards,

 

Ashu Gupta,
Project Engineer,
Kamal Cogent Energy,
Kamal Ratan Chanbers 1st Floor,
Opp. GPO, M.I. Road,
Jaipur 302001
Ph 141 2373185 (W)
Ph +91-9928049499 (M)
 <mailto:kce2 at kamalcogentenergy.com> kce2 at kamalcogentenergy.com
 <http://www.kamalcogentenergy.com> www.kamalcogentenergy.com



 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100510/15d25441/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: LEED CS.pdf
Type: application/pdf
Size: 34397 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100510/15d25441/attachment.pdf>


More information about the Bldg-sim mailing list