[Bldg-sim] eQuest 3.64 Error

Kris Raj kris_raj at rocketmail.com
Sun Oct 24 22:54:53 PDT 2010


Hello,
          Has anybody encountered this error in latest eQuest 3.64. I have 
errors such as this one totaling to about 10,000. Following is the error listed 
in the bdl file.

thanks.



     ******* "F5-6Core Zn (G.C16)" = ZONE
     *******    TYPE             = CONDITIONED
     *******    SPACE            = "F5-6Core Spc (G.C16)"
     *******    SIZING-OPTION    = "ADJUST-LOADS"
     *******    DESIGN-COOL-T    = 75
     *******    DESIGN-HEAT-T    = 60
     *******    FLOW/AREA        = 0.5
     *******    MIN-FLOW-RATIO   = 0.4
     *******    TERMINAL-TYPE    = SERIES-PIU
     *******    OA-FLOW/PER      = 50
     *******    COOL-TEMP-SCH    = "OFSys2 (VAVS) Cool Sch"
     *******    ..
*ERROR****************************************************************************************

*ERROR*****MIN-FLOW-SCH in F5-6Core Zn (G.C16) has Maximum number of
            expression dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****HEATING-CAPACITY in F5-6Core Zn (G.C16) has Maximum number of
            expression dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****COOLING-CAPACITY in F5-6Core Zn (G.C16) has Maximum number of
            expression dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****COOL-SH-CAP in F5-6Core Zn (G.C16) has Maximum number of expression
            dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****MULTIPLIER in F5-6Core Zn (G.C16) has Maximum number of expression
            dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****MAX-HEAT-RATE in F5-6Core Zn (G.C16) has Maximum number of
            expression dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****MAX-COOL-RATE in F5-6Core Zn (G.C16) has Maximum number of
            expression dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****BASEBOARD-RATING in F5-6Core Zn (G.C16) has Maximum number of
            expression dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****PANEL-LOSS-RATIO in F5-6Core Zn (G.C16) has Maximum number of
            expression dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****AIR-CHANGES/HR in F5-6Core Zn (G.C16) has Maximum number of
            expression dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****Value 0 of                  in SUBR-FUNCTIONS number 11 has The
            maximum number of
-NOTE- - -         DATA FOR     F5-6Core Zn (G.C16)
-INPUT - - - - - - - - - - - - - - - - - - - - - - - -  TYPE             = 
CONDITIONED
-INPUT - -                                              MIN-FLOW-RATIO   
=                       0.4000 FRAC.OR MULT.
-INPUT - -                                              FLOW/AREA        
=                       0.5000 CFM/SQFT
-INPUT - -                                              OA-FLOW/PER      
=                      50.0000 CFM
-INPUT - -                                              DESIGN-HEAT-T    
=                      60.0000 F
-INPUT - -                                              DESIGN-COOL-T    
=                      75.0000 F
-INPUT - -                                              COOL-TEMP-SCH    = 
OFSys2 (VAVS) Cool Sch
-INPUT - -                                              SIZING-OPTION    = 
ADJUST-LOADS
-INPUT - -                                              TERMINAL-TYPE    = 
SERIES-PIU
-INPUT - -                                              SPACE            = 
F5-6Core Spc (G.C16)
-DEFAULT -                                              ZONE-REPORTS     = YES
-DEFAULT -                                              ICE-RINK         = NO
-DEFAULT -                                              C-REHEAT-CAP     
=                       0.0000 BTU/HR
-DEFAULT -                                              C-HTG-SETBACK    
=                       1.0000
-DEFAULT -                                              C-EXH-FAN-BHP    
=                       0.0000 HP
-DEFAULT -                                              C-EF-DRIVE-EFF   
=                       1.0000 FRAC.OR MULT.
-DEFAULT -                                              C-EXH-FAN-NOM-HP 
=                       0.0000 HP
-DEFAULT -                                              C-ZONE-FAN-BHP   
=                       0.0000 HP
-DEFAULT -                                              C-ZF-FAN-DRV-EFF 
=                       1.0000 FRAC.OR MULT.
-DEFAULT -                                              C-ZF-NOM-HP      
=                       0.0000 HP
-DEFAULT -                                              C-C-ZFAN-KW/FLOW 
=                       0.0017 KW/CFM
-DEFAULT -                                              C-C-EXH-KW/FLOW  
=                       0.0017 KW/CFM
-DEFAULT -                                              C-C-CHW-COIL-Q   
=                       0.0000 GAL/MIN
-DEFAULT -                                              C-C-HW-COIL-Q    
=                       0.0000 GAL/MIN
-DEFAULT -                                              C-C-BBRD-COIL-Q  
=                       0.0000 GAL/MIN
-DEFAULT -                                              C-C-THERM-TYPE   
=                       0.0000
-DEFAULT -                                              C-C-THERM-BAND   
=                      33.8000 F
-DEFAULT -                                              C-C-OA-MET-DEF   
=                       0.0000
-DEFAULT -                                              C-C-OA-FLOW      
=                       0.0000 CFM
-DEFAULT -                                              C-C-OA-FLOW/PER  
=                       0.0000 CFM
-DEFAULT -                                              C-C-OA-CHANGES   
=                       0.0000
-DEFAULT -                                              C-C-EXH-FLOW     
=                       0.0000 CFM
-DEFAULT -                                              C-C-REHEAT       
=                       0.0000
-DEFAULT -                                              C-C-MIN-FLOW-RAT 
=                       1.0000 FRAC.OR MULT.
-DEFAULT -                                              C-C-PROP-ZR-1    
=                       0.0000
-DEFAULT -                                              C-C-PROP-ZR-2    
=                       0.0000
-DEFAULT -                                              C-C-PROP-ZR-3    
=                       0.0000

     ******* "F5-6Core Pl Zn (G.C46)" = ZONE
     *******    TYPE             = UNCONDITIONED
     *******    SPACE            = "F5-6Core Plnm (G.C46)"
     *******    SIZING-OPTION    = "ADJUST-LOADS"
     *******    DESIGN-COOL-T    = 80
     *******    DESIGN-HEAT-T    = 60
     *******    ..
*ERROR****************************************************************************************

*ERROR*****MULTIPLIER in F5-6Core Pl Zn (G.C46) has Maximum number of
            expression dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****FLOOR-MULTIPLIER in F5-6Core Pl Zn (G.C46) has Maximum number of
            expression dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****LIGHT-ELEC-METER in F5-6Core Pl Zn (G.C46) has Maximum number of
            expression dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****TASK-ELEC-METER in F5-6Core Pl Zn (G.C46) has Maximum number of
            expression dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****EQUIP-ELEC-METER in F5-6Core Pl Zn (G.C46) has Maximum number of
            expression dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****SOURCE-ELEC-METE in F5-6Core Pl Zn (G.C46) has Maximum number of
            expression dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****HEAT-ELEC-METER in F5-6Core Pl Zn (G.C46) has Maximum number of
            expression dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****COOL-ELEC-METER in F5-6Core Pl Zn (G.C46) has Maximum number of
            expression dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****HTREJ-ELEC-METER in F5-6Core Pl Zn (G.C46) has Maximum number of
            expression dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****AUX-ELEC-METER in F5-6Core Pl Zn (G.C46) has Maximum number of
            expression dependency lists (999768) exceeded.
*ERROR****************************************************************************************

*ERROR*****Value 0 of                  in SUBR-FUNCTIONS number 11 has The
            maximum number of
-NOTE- - -         DATA FOR     F5-6Core Pl Zn (G.C46)
-INPUT - - - - - - - - - - - - - - - - - - - - - - - -  TYPE             = 
UNCONDITIONED
-INPUT - -                                              DESIGN-HEAT-T    
=                      60.0000 F
-INPUT - -                                              DESIGN-COOL-T    
=                      80.0000 F
-INPUT - -                                              SIZING-OPTION    = 
ADJUST-LOADS
-INPUT - -                                              SPACE            = 
F5-6Core Plnm (G.C46)
-DEFAULT -                                              SS-VENT-CST      
=                       5.0000
-DEFAULT -                                              SS-VENT-WND      
=                       0.0000 1/KNOT
-DEFAULT -                                              SS-VENT-TEMP     
=                       0.0000  1/R
-DEFAULT -                                              SS-VENT-LIMIT-T  
=                     120.0000 F
-DEFAULT -                                              SS-VENT-KW/FLOW  
=                       0.0000 KW/CFM
-DEFAULT -                                              ZONE-REPORTS     = NO
-DEFAULT -                                              C-REHEAT-CAP     
=                       0.0000 BTU/HR
-DEFAULT -                                              C-HTG-SETBACK    
=                       1.0000
-DEFAULT -                                              C-EXH-FAN-BHP    
=                       7.0000 HP
-DEFAULT -                                              C-EF-DRIVE-EFF   
=                       1.0000 FRAC.OR MULT.
-DEFAULT -                                              C-EXH-FAN-NOM-HP 
=                       0.0000 HP
-DEFAULT -                                              C-ZONE-FAN-BHP   
=                       0.0000 HP
-DEFAULT -                                              C-ZF-FAN-DRV-EFF 
=                       1.0000 FRAC.OR MULT.
-DEFAULT -                                              C-ZF-NOM-HP      
=                       0.0000 HP
-DEFAULT -                                              C-C-ZFAN-KW/FLOW 
=                       0.0017 KW/CFM
-DEFAULT -                                              C-C-EXH-KW/FLOW  
=                       0.0017 KW/CFM
-DEFAULT -                                              C-C-CHW-COIL-Q   
=                       0.0000 GAL/MIN
-DEFAULT -                                              C-C-HW-COIL-Q    
=                       0.0000 GAL/MIN
-DEFAULT -                                              C-C-BBRD-COIL-Q  
=                       0.0000 GAL/MIN
-DEFAULT -                                              C-C-THERM-TYPE   
=                       0.0000
-DEFAULT -                                              C-C-THERM-BAND   
=                      33.8000 F
-DEFAULT -                                              C-C-OA-MET-DEF   
=                       0.0000
-DEFAULT -                                              C-C-OA-FLOW      
=                       0.0000 CFM
-DEFAULT -                                              C-C-OA-FLOW/PER  
=                       0.0000 CFM
-DEFAULT -                                              C-C-OA-CHANGES   
=                       0.0000
-DEFAULT -                                              C-C-EXH-FLOW     
=                       0.0000 CFM
-DEFAULT -                                              C-C-REHEAT       
=                       0.0000
-DEFAULT -                                              C-C-MIN-FLOW-RAT 
=                       1.0000 FRAC.OR MULT.
-DEFAULT -                                              C-C-PROP-ZR-1    
=                       0.0000
-DEFAULT -                                              C-C-PROP-ZR-2    
=                       0.0000
-DEFAULT -                                              C-C-PROP-ZR-3    
=                       0.0000



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20101024/1b871936/attachment.htm>


More information about the Bldg-sim mailing list