[Bldg-sim] Packed terminal heat pump performance table.

Carol Gardner cmg750 at gmail.com
Thu Sep 16 19:26:13 PDT 2010


Lots of info here and check the archives. This question gets asked a lot.

http://www.google.com/#hl=en&expIds=17259,24416,24472,25458,26094,26512,26563,26565&sugexp=ldymls&tok=fia0jSTTNAmianQMgpe6cg&xhr=t&q=what+appendix+g+table+to+use+for+packaged+terminal+heat+pump&cp=33&pf=p&sclient=psy&aq=f&aqi=&aql=&oq=what+appendix+g+table+to+use+for+packaged+terminal+heat+pump&gs_rfai=&pbx=1&fp=7b3e9e0669ddb0a1

On Thu, Sep 16, 2010 at 5:24 PM, Kris Raj <kris_raj at rocketmail.com> wrote:

> Hello,
>
> Does anybody know the difference between Table 6.8.1B and Table 6.8.1D.
> Which one should we use for packed terminal heat pump [appendix G system 2].
> They definitely use different rating conditions, but how is a single package
> unitary heat pump different from a packed terminal heat pump.
> Also, what would be the difference between an Air conditioner from Table
> 6.8.1A and a single –package vertical air conditioner from Table 6.8.1D.
>
> Thanks for your comments.
>  kris
>
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20100916/8075173b/attachment-0002.htm>


More information about the Bldg-sim mailing list