[Bldg-sim] External shading device design tool

[Jeff Haberl]

FYI:

I still am handing out free copies of the SOLRPATH software if you are interested. It basically shows the shading of external devices on the sunpath with a shading mask protractor.

Jeff

8=!  8=)  :=)  8=)  ;=)  8=)  8=(  8=)  8=()  8=)  8=|  8=)  :=')  8=)8=?

Jeff S. Haberl, Ph.D.,P.E., FASHRAE.............. jhaberl at tamu.edu<mailto:jhaberl at tamu.edu>

Professor............................................................Office Ph: 979-845-6507

Department of Architecture.............................Lab Ph:979-845-6065

Energy Systems Laboratory.............................FAX: 979-862-2457

Texas A&M University.....................................77843-3581

College Station, Texas, USA, 77843..................URL:www.esl.tamu.edu

8=/  8=)  :=)  8=)  ;=)  8=)  8=()  8=)  :=)  8=)  8=!  8=)  8=? 8=)8=0

From: bldg-sim-bounces at lists.onebuilding.org [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of JH Choi
Sent: Saturday, August 20, 2011 1:00 PM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] External shading device design tool

Dear Colleagues,

I am looking for a software for external shading device design.
I can recall a software that I used long time ago, which has a visual interface to show a size of overhang / fin based on input. Unfortunately, I cannot remember the name.

Please recommend any software which has similar functions.

Thanks in advance,

Bryan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20110820/949f9c65/attachment-0001.htm>