[Bldg-sim] Natural Ventilation
Cheney
chenyu73 at gmail.com
Wed Feb 9 22:05:30 PST 2011
Hi Sambhav,
For natural ventilation analysis, you may start with some field measurements
or wind tunnel test which can help you decide the boundary condition
precisely. Some key parameters, such as prevailing wind direction,
representative wind speed, air temperatures, surface temperatures, etc. are
all important components of the boundary condition. Meanwhile, building
geometry, building materials, surrounding buildings, topography, etc.
may influence the boundary condition significantly. You will have a holistic
consideration of all these variables and make reasonable simplification to
work out the boundary condition.
Regards,
Cheney
LinkedIN @ http://ca.linkedin.com/pub/yu-cheney-chen/27/637/72b
On Wed, Feb 9, 2011 at 8:54 PM, sambhav tiwari <tiwari.sambhav at gmail.com>wrote:
> Hi All,
> Does any one know how to model natural ventilation using cfd
> tools like fluent anysis starccm+ etc and what should be the
> boundary conditions applicable for natural ventilation in room.
>
> Thanks
> Sambhav
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20110209/3005bb11/attachment-0001.htm>
More information about the Bldg-sim
mailing list