[Bldg-sim] Equest EEM Error

[Alex Krickx]

Hi Ben,

You may be better off emailing the eQUEST list-serv (you need to sign up for it similarly to how you signed up for Building-Sim List). I have had some problems with weird EEM Wizard behavior - my solution was to manually edit the .pd2 file in wordpad. When you open the file, scroll down to the bottom - you should see where it describes your EEM measures. You can then make changes to the file (you should see the structure with the existing EEM measures - just be sure to follow that).

Another solution is to change to the Detailed Edit mode and make parametric runs - I've had less problems with them.

Good luck,
Alex


Alex Krickx, LEED AP
Building Energy Specialist
[cid:image001.jpg at 01CBCC62.9B42D1E0]
1250 Elko Dr, Sunnyvale, CA 94089
(t) 408.541.8124

Warning: The information contained in this e-mail may be privileged attorney-client communications or attorney work product and/or proprietary and confidential.  If the reader of this message is not the intended recipient then you have received it in error and any review, distribution or copying of this message is prohibited and you are to notify us immediately by reply e-mail and delete the original message immediately.



From: bldg-sim-bounces at lists.onebuilding.org [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Benjamin Jordan
Sent: Monday, February 14, 2011 1:36 PM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Equest EEM Error

Hello everyone,

I searched through the equest archives and couldn't find a solution (someone else had this problem but no one offered a solution).

Anyways, my problem is that while using the EEM Wizard my EEM changes are not saved (I'm trying a basic Glazing EEM-changing the U-value/SHGC). After I make the change and hit done, I then go back into the EEM and it has reverted back to the original values. Does anyone have a solution or ran into this problem before??

Thanks,

Ben Jordan
Burt Hill, a Stantec Company
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20110214/b2284a25/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 5602 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20110214/b2284a25/attachment-0002.jpg>