[Bldg-sim] JWT Q1 - Desiccant Example Files

[Talbert, Joshua]

Good Morning Sim Board,

I am working on a project where I am simulating a Desiccant Unit that is controlled off of a space humidity sensor.  I began with the example file DesiccantCVRhZoneRHCtrl.idf from the support documentation with the current E+ install.  Unfortunately the AIRLOOP associated with this example file is not quite the configuration I am looking for.  My attempts at re-authoring my Airloop have proven arduous at best.  I was hoping you folks could steer me towards some alternative example files.  The specific AIRLOOP arrangement I am looking for follows this path:

OA Mixing Box > Gas Fired Desiccant Wheel > Supply Fan > Chilled Water Coiling Coil > Hot Water Heating Coil

Thank you,
Josh

Joshua W. Talbert P.E., LEED-AP
Mechanical Engineer
Hallam///ICS
38 Eastwood Dr. Suite 200
S. Burlington, VT 05403
P: (802) 658-4891
F: (802) 658-1457



________________________________

CONFIDENTIALITY NOTICE:
The information contained in this transmission, as well as any accompanying documents, constitutes confidential and/or legally privileged information which is the property of Hallam-ICS. The information is intended solely for the individual entity named on this transmittal sheet. If you are not the designated recipient, you are hereby notified that any disclosure, copying, distribution or taking any action in reliance on this information is strictly prohibited. If you received this in error, please contact the sender and delete the material from any computer. Opinions, conclusions and the information in this message that do not relate to the official business of my firm shall be understood as neither given nor endorsed by it.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20110721/dd790453/attachment.htm>