[Bldg-sim] Generation of TMY3
Wyman, Kevin L CAR
Kevin.Wyman at carrier.utc.com
Thu Jun 2 11:34:48 PDT 2011
Well at the risk of referring you to the published work, the user’s manual describes the methodology quite thoroughly as well as what all of the fields are. I would think it would be a good starting point to developing your “own TMY2” datasets:
http://rredc.nrel.gov/solar/pubs/tmy2/
If you are looking for someone to summarize that work, I am sure there are consultants on this list that could undertake that effort at an hourly rate.
From: bldg-sim-bounces at lists.onebuilding.org [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Mohamad fahmy
Sent: Thursday, June 02, 2011 1:53 PM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Generation of TMY3
Dear All
Could any one list the executive steps of generating a TMY2 file rather than referring me to any of the related published works, i would appreciate it very much.
Kind regards,
Dr. Mohammad Fahmy
PhD, MSc, BSc, RIBA affiliate
Lecturer of Passive Design & Built Environment
Department of Architecture
Military Technical Collage
Cairo, Egypt
mido_fahmy2007 at hotmail.com
www.mtc.edu.eg
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20110602/36a5c504/attachment-0002.htm>
More information about the Bldg-sim
mailing list