[Bldg-sim] Sampling Methodologies
Tabares Velasco, Paulo Cesar
Paulo.Tabares at nrel.gov
Tue May 3 10:19:35 PDT 2011
Shrivaj
I would also suggest looking at the EPA's Building Assessment Survey and Evaluation (BASE) Study. The study was conducted few years ago following a standardized protocols over hundreds of buildings in the US (I am not sure if they followed ASHRAE PMP or if they are the similar).
http://www.epa.gov/iaq/base/
You can also look at the work done at PennState by Vladimir Vukovic and Jelena Srebric, following BASE protocols in a LEED Gold building in Pennsylvania:
http://etda.libraries.psu.edu/theses/approved/WorldWideFiles/ETD-3662/VladimirVukovic-Dissertation.pdf
Paulo Tabares
From: bldg-sim-bounces at lists.onebuilding.org [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Jeff Haberl
Sent: Tuesday, May 03, 2011 10:04 AM
To: Shivraj Dhaka; bldg-sim at lists.onebuilding.org
Subject: Re: [Bldg-sim] Sampling Methodologies
Hello,
I'd suggest you get a copy of the new ASHRAE Performance Metric Protocols. These have (3) levels of use: basic, intermediate and advanced for energy, water, IAQ, IEQ, comfort, lighting and acoustics. The PMP includes extensive references of other places to go to find more information.
Jeff
8=! 8=) :=) 8=) ;=) 8=) 8=( 8=) 8=() 8=) 8=| 8=) :=') 8=)8=?
Jeff S. Haberl, Ph.D.,P.E., FASHRAE..............jhaberl at tamu.edu
Professor............................................................Office Ph: 979-845-6507
Department of Architecture.............................Lab Ph:979-845-6065
Energy Systems Laboratory.............................FAX: 979-862-2457
Texas A&M University.....................................77843-3581
College Station, Texas, USA, 77843..................URL:www.esl.tamu.edu
8=/ 8=) :=) 8=) ;=) 8=) 8=() 8=) :=) 8=) 8=! 8=) 8=? 8=)8=0
________________________________
From: bldg-sim-bounces at lists.onebuilding.org [bldg-sim-bounces at lists.onebuilding.org] on behalf of Shivraj Dhaka [shivrajdhaka at gmail.com]
Sent: Tuesday, May 03, 2011 7:07 AM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Sampling Methodologies
Dear all,
For a research project I am planing to collect some indoor environment data's like air temp, air velocity, relative humidity etc
along with questionnaire survey to know about occupants feelings. I want to know about survey methodologies, sampling methodologies
which are equally important for statistical analysis of collected survey data's.
Can any body share his/her experience about sampling criterion, sampling methodology, analysis tools etc?.
Your efforts are highly appreciated.
Thanks
Shivraj
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20110503/9b3f9972/attachment-0002.htm>
More information about the Bldg-sim
mailing list