[Bldg-sim] modeling software for homes

Jeff Haberl jhaberl at tamu.edu
Wed May 25 10:25:57 PDT 2011


Deepika,

In Texas, you can use the IC3 software to check code compliance. This is a web-based software that requires no previous knowledge of simulation. This free software can be found at "ic3.tamu.edu". It evaluates IECC 2001-2009 code compliance in Texas using DOE2.1e as the simulation engine for single family and multifamily residences. Documentation and RESNET test results  can be found on-line.

Jeff

8=!  8=)  :=)  8=)  ;=)  8=)  8=(  8=)  8=()  8=)  8=|  8=)  :=')  8=)8=?

Jeff S. Haberl, Ph.D.,P.E., FASHRAE.............. jhaberl at tamu.edu<mailto:jhaberl at tamu.edu>

Professor............................................................Office Ph: 979-845-6507

Department of Architecture.............................Lab Ph:979-845-6065

Energy Systems Laboratory.............................FAX: 979-862-2457

Texas A&M University.....................................77843-3581

College Station, Texas, USA, 77843..................URL:www.esl.tamu.edu

8=/  8=)  :=)  8=)  ;=)  8=)  8=()  8=)  :=)  8=)  8=!  8=)  8=? 8=)8=0

From: bldg-sim-bounces at lists.onebuilding.org [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of deepika khowal
Sent: Tuesday, May 24, 2011 12:34 PM
To: equest-users at lists.onebuilding.org; bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] modeling software for homes

Hello
I am curious to know which modeling software do people use for Homes?
is it HEED ?
Thanks

Regards
Deepika
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20110525/7a4fd065/attachment-0002.htm>


More information about the Bldg-sim mailing list