[Bldg-sim] Process Load Density

[Morgan Heater]

http://www1.eere.energy.gov/buildings/commercial_initiative/reference_buil
dings.html

 

These reference buildings are probably a good place to start.  One would
expect that NREL has done some research.  

 

 

Morgan Heater, P.E.

BEMP, LEED AP

morgan at ecotope.com

206-322-3753 ext 209

 

From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Ahmed Azhari
Sent: Thursday, October 13, 2011 6:51 AM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Process Load Density

 

Hi all,

Is there some sort of a reference for process load density (W/m2) for each
building type and where can I find that? 

Thank you very much for your assistance.

 

Ahmed 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20111013/60cba768/attachment-0002.htm>