[Bldg-sim] Bldg-sim Digest, Vol 57, Issue 10

Jason Quinn jason.e.quinn at gmail.com
Thu Aug 9 14:15:50 PDT 2012


I've specified super-spacer on windows before. Have to point out they
were dual glazed units for  a boat and I needed organic shapes so I
wasn't concerned about the warm edge benefit.

http://www.edgetechig.com/SuperSpacer/Default.aspx

Not sure if the effective thermal conductivity is the right number for
eQuest but it is available on their technical info page.

Jason

On Thu, Aug 9, 2012 at 4:00 PM,  <bldg-sim-request at lists.onebuilding.org> wrote:
> Send Bldg-sim mailing list submissions to
>         bldg-sim at lists.onebuilding.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> or, via email, send a message with subject or body 'help' to
>         bldg-sim-request at lists.onebuilding.org
>
> You can reach the person managing the list at
>         bldg-sim-owner at lists.onebuilding.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Bldg-sim digest..."
>
> Today's Topics:
>
>    1. Southern California DesignBuilder/EnergyPlus Training     Class
>       (Christian Stalberg)
>    2. Glazing Study: Warm edge spacer example needed (Hayes Zirnhelt)
>
>
> ---------- Forwarded message ----------
> From: "Christian Stalberg" <cstalberg at naturalintelligence.us>
> To: <EnergyPlus_Support at yahoogroups.com>, <bldg-sim at lists.onebuilding.org>
> Cc:
> Date: Wed, 8 Aug 2012 17:19:52 -0400
> Subject: [Bldg-sim] Southern California DesignBuilder/EnergyPlus Training Class
>
> The following two-day DesignBuilder/EnergyPlus training has now been scheduled:
>
> September 24-25, 2012 in Irwindale, California
>
> Curriculum & Registration
>
> Don't miss this opportunity to be trained in the easiest to use, most powerful graphical user interface to EnergyPlus available.
>
> Questions? Please email training at designbuilderusa.com
>
>
>
> ---------- Forwarded message ----------
> From: Hayes Zirnhelt <hzirnhelt at hotmail.com>
> To: <bldg-sim at lists.onebuilding.org>
> Cc:
> Date: Thu, 9 Aug 2012 12:50:18 -0700
> Subject: [Bldg-sim] Glazing Study: Warm edge spacer example needed
> Hi,
>
> I am working on a lifecycle cost study on advanced glazing. I am looking for a typical warm edge / premium spacer to use as a reference / baseline in the study. Does anyone have a suggestion, and any info such as a drawing (dxf etc) or THERM file that they could share?
>
> Thanks,
>
> Hayes Zirnhelt
> B.A.Sc Integrated Engineering
> M.A.Sc Candidate Building Science
> Ryerson University
>
> _______________________________________________
> Bldg-sim mailing list
> Bldg-sim at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>


More information about the Bldg-sim mailing list