[Bldg-sim] output file name exceeds maximum 260 characters

[Studer, Daniel]

I believe that if you move the file so that the total file path does not exceed 260 characters, that this will go away.  I have run into this issue in the past as well and that fixed it for me.

Danny


From: bldg-sim-bounces at lists.onebuilding.org [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of a rovillard
Sent: Thursday, January 05, 2012 10:04 AM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] output file name exceeds maximum 260 characters

I am encountering the following issue, when I perform the simulation on my model before it finishes a warning message pops up. It says that the output file name exceeds maximum 260 characters. Does anybody know how to fix this problem?

[cid:image001.png at 01CCCB92.551735F0]

Best regards,

Alejandro

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20120105/c7f6a149/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 27038 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20120105/c7f6a149/attachment-0002.png>