[Bldg-sim] Building envelope

[Jeremiah Crossett]

My advise to Alex is to start with Energy Plus, as it has the most
development put into it and the mose capabilities.
Also Open studio has some great information as to where to start.
http://openstudio.nrel.gov/

On Wed, Jan 18, 2012 at 8:50 PM, mark dewsbury <Mark.Dewsbury at utas.edu.au>wrote:

> ** ** **
>
> Dear All,****
>
> The paper from referred to by Alex is no 6-7 years old. There has been a
> lot of movement in building simulation since then. ****
>
> Has anyone published formally or informally anything since 2005? ****
>
> ** **
>
> Thanks****
>
> Mark Dewsbury (PhD)
>
> Residential ****Thermal** **Performance** **Research**
> **School**** of Architecture & Design
> ****University** of **Tasmania****
> Locked Bag 1324
> Launceston 7250
> Ph: 03 6324 4471
> mob: 0417 290 807
> fax: 03 6324 4088
> e: mark.dewsbury at utas.edu.au****
>
> Dr Mark Dewsbury is currently a member of the Nationwide House Energy
> Rating Scheme Technical Advisory Committee (NatHERS TAC) ****
>   ------------------------------
>
> *From:* leen peeters [mailto:l.f.r.peeters at gmail.com]
> *Sent:* Thursday, 19 January 2012 7:35 AM
> *To:* Alex Colta
> *Cc:* bldg-sim at lists.onebuilding.org
> *Subject:* Re: [Bldg-sim] Building envelope****
>
> ** **
>
> Hi Alex,****
>
>  ****
>
> welcome to the world of nerds ;-)****
>
>  ****
>
> There is an intersting document to start with:****
>
>
> http://apps1.eere.energy.gov/buildings/tools_directory/pdfs/contrasting_the_capabilities_of_building_energy_performance_simulation_programs_v1.0.pdf
> ****
>
>  ****
>
>  ****
>
> That will probably get you a nice intro. If you are into the maths and
> equations, check out Joe Clarke's book on building simulation.****
>
> Also Jan Hensen recently published one on building simulation.****
>
>  ****
>
> Good luck and welcome!****
>
>  ****
>
> Leen****
>
> On Wed, Jan 18, 2012 at 9:14 PM, Alex Colta <
> alex.colta at rtsbuildingenvelope.com> wrote:****
>
> Good afternoon
>
> My name is Alex, and I'm new to building simulation world , and i saw you
> have many simulation software ,
>
> *1.from my understanding the most used ones are eQuest and Trace 700, is
> it true ?,*
> *   what the difference between these two, *
>
> *2.i would like to simulate more building envelope, what software suit
> more for that ?*
>
> Thank you very much for your support  and help
>
> with best regard
>
> Alex****
>
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG****
>
> ** **
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Jeremiah D. Crossett
Setanta Energy & Water
Phone: 503-688-8951
Email: jeremiah at setnrgh2o.com
http://www.setnrgh2o.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20120118/b741e250/attachment-0002.htm>