[Bldg-sim] Fwd: HVAC system Selection from ASHRAE

Nick Caton ncaton at smithboucher.com
Wed Jul 18 12:59:20 PDT 2012


Agreeing: "total conditioned floor area."

If your takeoff places you on the cusp between one system type vs. another, it may save you a headache later to share/coordinate your takeoff now against the designers responsible for filling out the LEED project area inputs, to ensure they aren't going to report a disagreeable figure down the road.  This may also be a good time to evaluate & advise the design team whether either baseline system type happens to compare particularly favorably against the proposed design.

Best of luck!

~Nick
[cid:489575314 at 22072009-0ABB]

NICK CATON, P.E.
SENIOR ENGINEER

Smith & Boucher Engineers
25501 west valley parkway, suite 200
olathe, ks 66061
direct 913.344.0036
fax 913.345.0617
www.smithboucher.com

From: bldg-sim-bounces at lists.onebuilding.org [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of CleanTech Analytics
Sent: Wednesday, July 18, 2012 11:44 AM
To: Sheelam Khare
Cc: Bldg-sim at lists.onebuilding.org
Subject: Re: [Bldg-sim] Fwd: HVAC system Selection from ASHRAE

Total building- conditioned floor area


Jeremiah D. Crossett
CleanTech Analytics
503-688-8951
www.cleantechanalytics.com<http://www.cleantechanalytics.com>

[http://cleantechanalytics.com/images/stories/cleantech%20analytics%20120.PNG]

This document may contain valuable information proprietary to CleanTech Analytics which is private and confidential. It may not be shared, copied, stored or transmitted in any form without the prior written consent of CleanTech Analytics


On Wed, Jul 18, 2012 at 5:40 AM, Sheelam Khare <sheelamkhare26 at gmail.com<mailto:sheelamkhare26 at gmail.com>> wrote:
---------- Forwarded message ----------
From: Sheelam Khare <sheelamkhare26 at gmail.com<mailto:sheelamkhare26 at gmail.com>>
Date: Wed, Jul 18, 2012 at 4:15 PM
Subject: HVAC system Selection from ASHRAE
To: Bldg-sim at lists.onebuilding.org<mailto:Bldg-sim at lists.onebuilding.org>


Hello All...
I am making a model in Design Builder,for that I chose the HVAC system
according to the ASHRAE 90.1  in Appendix G table G3.1 providing the
HVAC system based on sq. ft area. I want to know that this area is
conditioned area of the floor or it is the total floor area of the
building.
Sheelam Khare....

--
real champ..................
_______________________________________________
Bldg-sim mailing list
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
To unsubscribe from this mailing list send  a blank message to BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20120718/13b50032/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1459 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20120718/13b50032/attachment-0002.jpg>


More information about the Bldg-sim mailing list