[Bldg-sim] Fwd: Problem of Manage Sizing in Design Builder

CleanTech Analytics jeremiah at cleantechanalytics.com
Fri Jul 27 23:04:08 PDT 2012


>From your err, it looks like you have a custom schedule that is the issue.

You can also export your IDF and check the objects in IDF editor-
(recommended)


*Jeremiah D. Crossett*
*CleanTech Analytics*
*503-688-8951*
*www.cleantechanalytics.com* <http://www.cleantechanalytics.com>


*

This document may contain valuable information proprietary to CleanTech
Analytics which is private and confidential. It may not be shared, copied,
stored or transmitted in any form without the prior written consent of
CleanTech Analytics
*



On Fri, Jul 27, 2012 at 3:03 AM, Sheelam Khare <sheelamkhare26 at gmail.com>wrote:

> ---------- Forwarded message ----------
> From: Sheelam Khare <sheelamkhare26 at gmail.com>
> Date: Fri, Jul 27, 2012 at 11:10 AM
> Subject: Problem of Manage Sizing in Design Builder
> To: Bldg-sim at lists.onebuilding.org
>
>
> Hello All...
> I am using the design Builder for simulation, in this I am facing the
> problem of "Manage Sizing" which interrupt the simulation process.The
> Warning is showing that"Warning ** ManageSizing: For a zone sizing
> run, there must be at least 1 Sizing:Zone input object.
> SimulationControl Zone Sizing option ignored."I tried to remove this
> by going to the "Model Option".
>  It also shows the error of Time step which i changed by clicking on
> the Model option. But the first one is not solved .
> Sheelam Khare....
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20120727/f94118f1/attachment-0001.htm>


More information about the Bldg-sim mailing list