[Bldg-sim] EUI calculation using ECB Method and PRM Method

Arpan Bakshi arpanbakshi at gmail.com
Fri Jun 8 07:18:38 PDT 2012


In our work we are also leaning towards using cost intensities based on a
model rather than energy intensities to "LEED-proof" our early design
comparisons.


Arpan Bakshi, LEED AP BD+C



On Fri, Jun 8, 2012 at 10:14 AM, Shanta Tucker <shanta.tucker at atelierten.com
> wrote:

> Hello modeling community,
> I've always thought that when trying to forecast an EUI for a building
> with a whole building energy model, the better approach would be to use
> 90.1 appx G PRM over Section 11 ECB. While I realize that neither one is
> intended for energy use predictions per se, I am curious what folks think
> about using Section 11. Thoughts? Pros/Cons?
>
> Thanks,
>
> Shanta Tucker, PE, LEED AP BD+C, BEMP
> Associate
>
> Atelier Ten
> Environmental Design Consultants + Lighting Designers
>
> 45 East 20th Street, 4th Floor
> New York NY 10003
> T +1 (212) 254 4500 x210
> F +1 (212) 254 1259
> shanta.tucker at atelierten.com
>
> www.atelierten.com
>
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20120608/22bcf0a3/attachment-0002.htm>


More information about the Bldg-sim mailing list