[Bldg-sim] Modeling Centralized Water-to-Water HPs with Geothermal HPs using EE4

[Brian Fountain]

Hi Ahmed,

 

You can define multiple plants in EE4 - what if you created one plant for
your centralized water-to-water heat pumps and a second plant for your
distributed heat pumps?

 

Brian

 

From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Ahmed Azhari
Sent: Friday, June 22, 2012 1:04 PM
To: bldg-sim at lists.onebuilding.org
Subject: [Bldg-sim] Modeling Centralized Water-to-Water HPs with Geothermal
HPs using EE4

 

I'm using EE4 (Canadian Energy Modeling Software) to model centralized
water-to-water heat pumps system which provides hot/chilled water to make up
air unit heating and cooling coils respectively, there are also distributed
ground source heat pumps in the spaces which are connected to the ground to
extract/reject heat. This combination of systems are not supported in EE4,
does anyone know of a work-around to model such system?

 

I appreciate any input on this ...

 

Thanks,

Ahmed

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20120622/fdfe8256/attachment-0002.htm>