[Bldg-sim] EE4 Remote Condenser

[Chris Jones]

Oleksandra
You can't directly model the water cooled condenser with EE4.  You 
would have to edit the .DOE file and run from the command line.  The 
DOE2.1e Supplement, 3.83 details the water cooled 
condenser.  Available on the PSZ, PVAVS, and PVVT systems.


At 05:22 PM 30/04/2012, Oleksandra Onisko wrote:
>Hello All,
>
>I am trying to model an air handler in EE4 which has a hot water 
>heating coil and DX cooling but with a remote water-cooled 
>condenser. Is it possible to model this system in EE4? Any 
>suggestions on work-arounds?
>
>Thanks,
>
>___________________________________________
>
>Oleksandra Onisko, <http://B.A.Sc>B.A.Sc., LEED AP BD+C
>Project Manager & Energy Modeler
>
>ECOVERT | Sustainability Consultants
>                    Office 416.350.2002
>                    Direct Line 416.987.1105
>                    Fax 416.766.5021
>                    55 Ormskirk Avenue
>                    Toronto, ON, M6S 4V6
>                    <http://www.ecovert.ca>www.ecovert.ca
>
>_______________________________________________
>Bldg-sim mailing list
>http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>To unsubscribe from this mailing list send  a blank message to 
>BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG

 >>
Christopher Jones, P.Eng.
Suite 1801, 1 Yonge Street
Toronto, ON M5E1W7
Tel. 416-203-7465
Fax. 416-946-1005
email cj at enersave.ca
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20120502/7b1b3854/attachment.htm>