[Bldg-sim] TRNSYS for LEED

[francesco.passerini at inwind.it]

 I have
2 doubts concerning the use of TRNSYS for LEED.

Autosizing.
     The equipment capacities for the baseline building design shall be based
     on sizing runs for each orientation (see G3.1.2.2 and G3.1.2.2.1 of ASHRAE
     90.1:2007). Is "autosizing" equipment capacities according to
     ASHRAE possible with TRNSYS?Compliance
     summaries (Input summaries and output summaries). Does TRNSYS produce compliance
     summaries according to LEED? If the TRNSYS user has to integrate the
     compliance summaries in order to satisfy the LEED standard, does that
     integration require a lot of work?
Best Regards


Francesco Passerin 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20120511/9a948b2e/attachment.htm>