[Bldg-sim] RES: EnergyPlus IDFs, gbXML and Bentley/Autodesk

[CleanTech Analytics]

   - I was sigend up for the webnar, but unfortunately missed the webnaiar
   due to my attendance of the design builder training I was at at the time.
   still very interested in future versions of micro station/E+(ACOSIM) Tho,,
   Once the latest v7.1  iteration ACEOSIM is released I am very excited
   indeed, but have to say the design builder training and software
   are excellent and is the most advanced energy plus interface currently
   available! --  http://www.designbuilderusa.com/


*Jeremiah D. Crossett*
*CleanTech Analytics*
*503-688-8951*
 *www.cleantechanalytics.com* <http://www.cleantechanalytics.com>


*

This document may contain valuable information proprietary to CleanTech
Analytics which is private and confidential. It may not be shared, copied,
stored or transmitted in any form without the prior written consent of
CleanTech Analytics
*



On Thu, May 24, 2012 at 10:48 PM, kanagaraj ganesan
<gkanagaraj83 at gmail.com>wrote:

> Dear All,
> I registered for the webinar on " How gbXML Works with New Energy
> Performance Software from Autodesk and Bentley " but unfortunately missed
> it due to its off timing in India. Would it be possible to view the
> recording of this webinar?
>
> If available, also direct me to similar recorded webinars.
>
> Many thanks,
>
> With Regards,
> Kanagaraj
>
> On Fri, May 25, 2012 at 2:21 AM, <Dru.Crawley at bentley.com> wrote:
>
>>  A 30-day free trial is available for AES – go to the web site for more
>> information:
>> http://www.bentley.com/en-US/Products/AECOsim+Energy+Simulator/****
>>
>> ** **
>>
>> ** **
>>
>> ** **
>>
>> *From:* Arpan Bakshi [mailto:arpanbakshi at gmail.com]
>> *Sent:* Thursday, May 24, 2012 4:43 PM
>> *To:* Dru Crawley
>> *Cc:* bldg-sim at lists.onebuilding.org
>> *Subject:* Re: [Bldg-sim] RES: EnergyPlus IDFs, gbXML and
>> Bentley/Autodesk****
>>
>> ** **
>>
>> Bentley does not provide a 30-day trial for AECOsim Energy Simulator?****
>>
>>
>> ****
>>
>>  ****
>>
>> Arpan Bakshi, LEED AP BD+C****
>>
>>
>>
>> ****
>>
>> On Thu, May 24, 2012 at 4:40 PM, <Dru.Crawley at bentley.com> wrote:****
>>
>> AECOsim Energy Simulator currently allows user to import HVAC systems
>> from IDFs to start building their HVAC models. We will be implementing more
>> importing capabilities over the next months.  Users have the option of
>> starting with one of the 28 preconfigured HVAC systems in AES and modifying
>> those to match their system configuration.  These preconfigured HVAC
>> systems give users access to all the EnergyPlus inputs required for each
>> system.  Users can also create their own systems and save them for future
>> use.****
>>
>>  ****
>>
>> AES offers three means of creating geometry – Conceptual model (select
>> building and space types, set overall building height, weather location, %
>> glazing, number of stories, draw the outline, select zoning, and HVAC
>> system); 2-D (import floor plans – DGN, DWG, DXF, define rooms); and gbXML
>> (import 3-D model, attribute spaces).****
>>
>>  ****
>>
>> When Energy Simulator starts a simulation, it automatically creates a
>> user-readable IDF in the project directory.****
>>
>>  ****
>>
>>  ****
>>
>>  ****
>>
>> *From:* bldg-sim-bounces at lists.onebuilding.org [mailto:
>> bldg-sim-bounces at lists.onebuilding.org] *On Behalf Of *Leandro
>> Meneguelli Biondo
>> *Sent:* Thursday, May 24, 2012 4:27 PM
>> *To:* Lopez, Phylroy; bldg-sim at lists.onebuilding.org
>> *Subject:* [Bldg-sim] RES: EnergyPlus IDFs, gbXML and Bentley/Autodesk***
>> *
>>
>>  ****
>>
>> Ok, but it would make more sense if this capability was buit in on both
>> softwares… specially on AECOsim that uses the EP engine… I surely would
>> like to have all the energyplus power for “freedom” on object settings
>> (specially HVAC and green energy) working in parallel to the better
>> interface and automation offered by the simulation suites. Would that be
>> fair?****
>>
>>  ****
>>
>> *Leandro M Biondo*
>> Consultor de Eficiência Energética****
>>
>> Meteorologista
>> Rua Álvaro Rodrigues, 182 - Cj. 153
>> Brooklin - São Paulo - CEP 04582-000
>> tel: (11) 2149 0300 Ram.352/cel: (11) 6436 3510
>> *http://www.cte.com.br* ****
>>
>>  ****
>>
>>  ****
>>
>>  ****
>>
>> *Aviso Legal*****
>>
>> Esta mensagem pode conter informações confidenciais e/ou privilegiadas.
>> Se você não****
>>
>> for o destinatário ou a pessoa autorizada a receber esta mensagem, não
>> deve usar, copiar****
>>
>> ou divulgar as informações nela contida ou tomar qualquer ação baseada
>> nessas****
>>
>> informações. Este ambiente está sujeito a monitoramento.****
>>
>>  ****
>>
>> *De:* Lopez, Phylroy [mailto:Phylroy.Lopez at NRCan-RNCan.gc.ca<Phylroy.Lopez at NRCan-RNCan.gc.ca>]
>>
>> *Enviada em:* Thursday, May 24, 2012 15:26
>> *Para:* Leandro Meneguelli Biondo; bldg-sim at lists.onebuilding.org
>> *Assunto:* RE: [Bldg-sim] EnergyPlus IDFs, gbXML and Bentley/Autodesk****
>>
>>  ****
>>
>>  ****
>>
>> Openstudio I think has that capability. If not it is in the works. ****
>>
>>  ****
>>  ------------------------------
>>
>> *From:* bldg-sim-bounces at lists.onebuilding.org
>> [mailto:bldg-sim-bounces at lists.onebuilding.org] *On Behalf Of *Leandro
>> Meneguelli Biondo
>> *Sent:* May 24, 2012 14:22
>> *To:* bldg-sim at lists.onebuilding.org
>> *Subject:* [Bldg-sim] EnergyPlus IDFs, gbXML and Bentley/Autodesk****
>>
>> This is a simple question that I tought of on the gbXML webinar thinking
>> it would be a basic routine on both Bentley´s AECOsim and Autodesk´s Vasari
>> systems, but haven´s found an answer so far. That is:****
>>
>>  ****
>>
>> How can I import EnergyPlus (5, 6 and 7) idf files with all my current
>> modeling information to the environments? From what I have seen there
>> always is a way to start from a gbXML, but how do I go from a “idf” file to
>> a gbXML or straight to AECO or Vasari?****
>>
>>  ****
>>
>> Also, how do I keep compatibility between my AECO / Vasari simulations
>> and a EnergyPlus model?****
>>
>>  ****
>>
>>  ****
>>
>>  ****
>>
>> [image: Descrição: Descrição: Descrição: Descrição:
>> cid:image001.png at 01CC81F3.24A80950]****
>>
>> *Leandro M Biondo*
>> Energy Efficiency Consultant****
>>
>> Meteorologist
>> Rua Álvaro Rodrigues, 182 - Cj. 153
>> Brooklin - São Paulo - Brasil
>> tel: (11) 2149 0300 cel: (11) 6436 3510
>> *http://www.cte.com.br* ****
>>
>>  ****
>>
>>  ****
>>
>>
>> _______________________________________________
>> Bldg-sim mailing list
>> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG****
>>
>> ** **
>>
>> _______________________________________________
>> Bldg-sim mailing list
>> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>
>
> --
> G.KANAGARAJ
> 2-F, C.P.W.D. Colony,
> Vasant Vihar,
> New Delhi-57
> Mob. No. - +91 9971841354
> Alternate e-mail - g_kanagaraj83 at rediffmail.com
>
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20120524/953d0bd2/attachment-0002.htm>