[Bldg-sim] RES: EnergyPlus IDFs, gbXML and Bentley/Autodesk

[kanagaraj ganesan]

Thanks Mr. Dru  Crawley for providing link to the webinar.
*
*

On Fri, May 25, 2012 at 5:03 PM, Dru Crawley <dbcrawley at gmail.com> wrote:

> From the gbXML LinkedIn Group, posted by Stephen Roth:
>
> 'Recording of Autodesk Vasari/Bentley AECOsim Webinar - May 23, 2012
>
> Here's a link to the recording of the Autodesk Vasari/Bentley AECOsim
> webinar that I hosted.  https://vimeo.com/42737981'
>
> On Fri, May 25, 2012 at 2:40 AM, CleanTech Analytics <
> jeremiah at cleantechanalytics.com> wrote:
>
>>
>>    - I was sigend up for the webnar, but unfortunately missed the
>>    webnaiar due to my attendance of the design builder training I was at at
>>    the time. still very interested in future versions of micro
>>    station/E+(ACOSIM) Tho,, Once the latest v7.1  iteration ACEOSIM is
>>    released I am very excited indeed, but have to say the design builder
>>    training and software are excellent and is the most advanced energy plus
>>    interface currently available! --  http://www.designbuilderusa.com/
>>
>>
>> *Jeremiah D. Crossett*
>> *CleanTech Analytics*
>> *503-688-8951*
>>  *www.cleantechanalytics.com* <http://www.cleantechanalytics.com>
>>
>>
>> *
>>
>> This document may contain valuable information proprietary to CleanTech
>> Analytics which is private and confidential. It may not be shared, copied,
>> stored or transmitted in any form without the prior written consent of
>> CleanTech Analytics
>> *
>>
>>
>>
>> On Thu, May 24, 2012 at 10:48 PM, kanagaraj ganesan <
>> gkanagaraj83 at gmail.com> wrote:
>>
>>> Dear All,
>>> I registered for the webinar on " How gbXML Works with New Energy
>>> Performance Software from Autodesk and Bentley " but unfortunately
>>> missed it due to its off timing in India. Would it be possible to view the
>>> recording of this webinar?
>>>
>>> If available, also direct me to similar recorded webinars.
>>>
>>> Many thanks,
>>>
>>> With Regards,
>>> Kanagaraj
>>>
>>> On Fri, May 25, 2012 at 2:21 AM, <Dru.Crawley at bentley.com> wrote:
>>>
>>>>  A 30-day free trial is available for AES – go to the web site for
>>>> more information:
>>>> http://www.bentley.com/en-US/Products/AECOsim+Energy+Simulator/****
>>>>
>>>> ** **
>>>>
>>>> ** **
>>>>
>>>> ** **
>>>>
>>>> *From:* Arpan Bakshi [mailto:arpanbakshi at gmail.com]
>>>> *Sent:* Thursday, May 24, 2012 4:43 PM
>>>> *To:* Dru Crawley
>>>> *Cc:* bldg-sim at lists.onebuilding.org
>>>> *Subject:* Re: [Bldg-sim] RES: EnergyPlus IDFs, gbXML and
>>>> Bentley/Autodesk****
>>>>
>>>> ** **
>>>>
>>>> Bentley does not provide a 30-day trial for AECOsim Energy Simulator?**
>>>> **
>>>>
>>>>
>>>> ****
>>>>
>>>>  ****
>>>>
>>>> Arpan Bakshi, LEED AP BD+C****
>>>>
>>>>
>>>>
>>>> ****
>>>>
>>>> On Thu, May 24, 2012 at 4:40 PM, <Dru.Crawley at bentley.com> wrote:****
>>>>
>>>> AECOsim Energy Simulator currently allows user to import HVAC systems
>>>> from IDFs to start building their HVAC models. We will be implementing more
>>>> importing capabilities over the next months.  Users have the option of
>>>> starting with one of the 28 preconfigured HVAC systems in AES and modifying
>>>> those to match their system configuration.  These preconfigured HVAC
>>>> systems give users access to all the EnergyPlus inputs required for each
>>>> system.  Users can also create their own systems and save them for future
>>>> use.****
>>>>
>>>>  ****
>>>>
>>>> AES offers three means of creating geometry – Conceptual model (select
>>>> building and space types, set overall building height, weather location, %
>>>> glazing, number of stories, draw the outline, select zoning, and HVAC
>>>> system); 2-D (import floor plans – DGN, DWG, DXF, define rooms); and gbXML
>>>> (import 3-D model, attribute spaces).****
>>>>
>>>>  ****
>>>>
>>>> When Energy Simulator starts a simulation, it automatically creates a
>>>> user-readable IDF in the project directory.****
>>>>
>>>>  ****
>>>>
>>>>  ****
>>>>
>>>>  ****
>>>>
>>>> *From:* bldg-sim-bounces at lists.onebuilding.org [mailto:
>>>> bldg-sim-bounces at lists.onebuilding.org] *On Behalf Of *Leandro
>>>> Meneguelli Biondo
>>>> *Sent:* Thursday, May 24, 2012 4:27 PM
>>>> *To:* Lopez, Phylroy; bldg-sim at lists.onebuilding.org
>>>> *Subject:* [Bldg-sim] RES: EnergyPlus IDFs, gbXML and Bentley/Autodesk*
>>>> ***
>>>>
>>>>  ****
>>>>
>>>> Ok, but it would make more sense if this capability was buit in on both
>>>> softwares… specially on AECOsim that uses the EP engine… I surely would
>>>> like to have all the energyplus power for “freedom” on object settings
>>>> (specially HVAC and green energy) working in parallel to the better
>>>> interface and automation offered by the simulation suites. Would that be
>>>> fair?****
>>>>
>>>>  ****
>>>>
>>>> *Leandro M Biondo*
>>>> Consultor de Eficiência Energética****
>>>>
>>>> Meteorologista
>>>> Rua Álvaro Rodrigues, 182 - Cj. 153
>>>> Brooklin - São Paulo - CEP 04582-000
>>>> tel: (11) 2149 0300 Ram.352/cel: (11) 6436 3510
>>>> *http://www.cte.com.br* ****
>>>>
>>>>  ****
>>>>
>>>>  ****
>>>>
>>>>  ****
>>>>
>>>> *Aviso Legal*****
>>>>
>>>> Esta mensagem pode conter informações confidenciais e/ou privilegiadas.
>>>> Se você não****
>>>>
>>>> for o destinatário ou a pessoa autorizada a receber esta mensagem, não
>>>> deve usar, copiar****
>>>>
>>>> ou divulgar as informações nela contida ou tomar qualquer ação baseada
>>>> nessas****
>>>>
>>>> informações. Este ambiente está sujeito a monitoramento.****
>>>>
>>>>  ****
>>>>
>>>> *De:* Lopez, Phylroy [mailto:Phylroy.Lopez at NRCan-RNCan.gc.ca<Phylroy.Lopez at NRCan-RNCan.gc.ca>]
>>>>
>>>> *Enviada em:* Thursday, May 24, 2012 15:26
>>>> *Para:* Leandro Meneguelli Biondo; bldg-sim at lists.onebuilding.org
>>>> *Assunto:* RE: [Bldg-sim] EnergyPlus IDFs, gbXML and Bentley/Autodesk**
>>>> **
>>>>
>>>>  ****
>>>>
>>>>  ****
>>>>
>>>> Openstudio I think has that capability. If not it is in the works. ****
>>>>
>>>>  ****
>>>>  ------------------------------
>>>>
>>>> *From:* bldg-sim-bounces at lists.onebuilding.org
>>>> [mailto:bldg-sim-bounces at lists.onebuilding.org] *On Behalf Of *Leandro
>>>> Meneguelli Biondo
>>>> *Sent:* May 24, 2012 14:22
>>>> *To:* bldg-sim at lists.onebuilding.org
>>>> *Subject:* [Bldg-sim] EnergyPlus IDFs, gbXML and Bentley/Autodesk****
>>>>
>>>> This is a simple question that I tought of on the gbXML webinar
>>>> thinking it would be a basic routine on both Bentley´s AECOsim and
>>>> Autodesk´s Vasari systems, but haven´s found an answer so far. That is:
>>>> ****
>>>>
>>>>  ****
>>>>
>>>> How can I import EnergyPlus (5, 6 and 7) idf files with all my current
>>>> modeling information to the environments? From what I have seen there
>>>> always is a way to start from a gbXML, but how do I go from a “idf” file to
>>>> a gbXML or straight to AECO or Vasari?****
>>>>
>>>>  ****
>>>>
>>>> Also, how do I keep compatibility between my AECO / Vasari simulations
>>>> and a EnergyPlus model?****
>>>>
>>>>  ****
>>>>
>>>>  ****
>>>>
>>>>  ****
>>>>
>>>> [image: Descrição: Descrição: Descrição: Descrição:
>>>> cid:image001.png at 01CC81F3.24A80950]****
>>>>
>>>> *Leandro M Biondo*
>>>> Energy Efficiency Consultant****
>>>>
>>>> Meteorologist
>>>> Rua Álvaro Rodrigues, 182 - Cj. 153
>>>> Brooklin - São Paulo - Brasil
>>>> tel: (11) 2149 0300 cel: (11) 6436 3510
>>>> *http://www.cte.com.br* ****
>>>>
>>>>  ****
>>>>
>>>>  ****
>>>>
>>>>
>>>> _______________________________________________
>>>> Bldg-sim mailing list
>>>> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>>>> To unsubscribe from this mailing list send  a blank message to
>>>> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG****
>>>>
>>>> ** **
>>>>
>>>> _______________________________________________
>>>> Bldg-sim mailing list
>>>> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>>>> To unsubscribe from this mailing list send  a blank message to
>>>> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>>>>
>>>>
>>>
>>>
>>> --
>>> G.KANAGARAJ
>>> 2-F, C.P.W.D. Colony,
>>> Vasant Vihar,
>>> New Delhi-57
>>> Mob. No. - +91 9971841354
>>> Alternate e-mail - g_kanagaraj83 at rediffmail.com
>>>
>>>
>>> _______________________________________________
>>> Bldg-sim mailing list
>>> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>>> To unsubscribe from this mailing list send  a blank message to
>>> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>>>
>>>
>>
>> _______________________________________________
>> Bldg-sim mailing list
>> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
G.KANAGARAJ
2-F, C.P.W.D. Colony,
Vasant Vihar,
New Delhi-57
Mob. No. - +91 9971841354
Alternate e-mail - g_kanagaraj83 at rediffmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20120525/7907f3cb/attachment-0002.htm>