[Bldg-sim] Energy-10 manuals

[Luis Peréz-Lombard]

Dear colleagues:

I wonder if any of you could know where can I find Technical or Engineer's 
manuals of Energy-10 simulation engine.

I am interested in particular in the model that it uses to calculate heat 
transfer through underground floors.

Any help is welcome.

Sincerely,

LPL

-------------------------------------------------------------
Luis Pérez-Lombard
Dr. Ingeniero Industrial
Profesor Contratado Doctor
Departamento de Ingeniería Energética
Escuela Superior de Ingenieros
Universidad de Sevilla
Camino de los Descubrimientos s/n
41092 SEVILLA
Tfno.:      95.448.72.56
Fax:         95.446.31.53
e-mail:    lpl at us.es
-------------------------------------------------------------
----- Original Message ----- 
From: "Bishop, Bill" <bbishop at PathfinderEngineers.com>
To: "Neetu Singh" <neetu at greenengineer.com>; 
<bldg-sim at lists.onebuilding.org>
Sent: Friday, July 31, 2009 4:47 PM
Subject: Re: [Bldg-sim] eQuest : How to Save Results to xls


> Neetu,
>
> When you open the .sim file with D2SimViewer, click "Hourly Results" in
> the upper right. An Excel file is generated and opened. If you want
> additional information to show up, create a new Hourly Report Block from
> the Component Tree in the Project & Site module in DD Edit mode.
>
> Regards,
> Bill
>
> William Bishop, EIT, LEED(r) AP | Pathfinder Engineers LLP
> Mechanical Engineer
>
> 134 South Fitzhugh Street
> Rochester, NY 14608
> T: (585) 325-6004 Ext. 114
> F: (585) 325-6005
> bbishop at pathfinderengineers.com
>
> www.pathfinderengineers.com
> P Please strive to live sustainably.
> -----Original Message-----
> From: bldg-sim-bounces at lists.onebuilding.org
> [mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of Neetu Singh
> Sent: Friday, July 31, 2009 10:28 AM
> To: bldg-sim at lists.onebuilding.org
> Subject: [Bldg-sim] eQuest : How to Save Results to xls
>
> Hi All,
>
> I was wondering if anyone can give me some guidance upon saving results
> in
> xls from .sim output file.
> My problem: Is it possible to output meter data to xls format from
> eQuest.
> Also can parts of the .sim file be generated in xls format?
> If I were to take the current xls report that eQuest generates, it does
> not
> have meter data say a chilled water meter or so, I wanted to know where
> is
> all this being set up.
>
> I appreciate any help that I can get on this.
>
> Thanks
> Neetu
>
>
> Neetu Singh, LEED AP
> The Green Engineer, LLP
> Sustainable Design Consulting
> 50 Beharrell Street
> Concord, MA 01742
> t: 978.369.8978
> neetu at greenengineer.com
> www.greenengineer.com
>
>
>
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to 
> BLDG-SIM-UNSUBSCRIBE at ONEBUILDING.ORG


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.42/2278 - Release Date: 08/02/09 
17:56:00