[Bldg-sim] LEED Increased Ventilation Credit and Energy Modeling

Joe Chappell JoeC at designengineers.com
Thu Mar 6 12:50:42 PST 2014


Good day,

I have a question regarding the LEED credit for Increased Ventilation (IEQc2).  This is the credit awarded for exceeding ventilation in all spaces by 30% beyond the ASHRAE standard 62.1 requirements.  It seems obvious that the design model ventilation rates would be those 30% higher than 62.1 requirements.  What then would the baseline model ventilation rates be?

If you strictly follow 90.1 Appendix G, you should always model baseline and proposed equivalent except for when taking credit for demand controlled ventilation.  However, it seems in this case that it could also be argued (by LEED) that you should model the ASHRAE 62.1 required ventilation rates in the baseline model, not those that are 30% higher and therefore pay the energy expense( most climates) for increased outside air.

Does anyone have any experience with LEED on this issue?  Thanks in advance.

Kind regards,
Joe Chappell


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20140306/f55f7718/attachment.htm>


More information about the Bldg-sim mailing list