[Bldg-sim] Building Heat Gains

[Sambhav Tiwari]

Hi All,
          Thanks for the reply this analysis was done in ies ve and the
external conduction gains are increasing with shading while solar gains are
reducing

i am sending the snapsort of the building with shading in east and west

Regards
Sambhav

On Sat, Nov 22, 2014 at 9:46 PM, Attiq <aur at bepc.biz> wrote:

> The shades are attached to the building exterior and there is no thermal
> break between the shades and the exterior walls. The shades act as fins
> conducting heat to the outside.
>
> Attiq
>
> Sent from my iPhone
>
> > On Nov 22, 2014, at 7:15 AM, Sambhav Tiwari <tiwari.sambhav at gmail.com>
> wrote:
> >
> > Dear All,
> >                I am analyzing a rectangular building with each and west
> facades structured glazed and forming longer sides of rectangle  and i
> shaded these facades with louvers (shading device)
> >
> > I compared the annual heat gains of two case1 building with no shading
> case 2 building with shading(louvers) what i found was there is
> considerable reduction in annual solar gains in building but the annual
> external conduction gains in building have increased after shading i am
> unable to understand this.
> >
> > Any one who can share his ideas on this.
> >
> >
> > Warm Regards
> > Sambhav Tiwari
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20141124/2f8a33df/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Building with shading.docx
Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document
Size: 333464 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20141124/2f8a33df/attachment.bin>