[Bldg-sim] USGBC and EE4 models

Cheney chenyu73 at gmail.com
Tue Sep 23 09:56:30 PDT 2014

Hi Chris,

1. In general,the  USGBC does not approve or certify software for LEED
energy modelling. Instead, the  requirement for LEED Submission is that the
software must meet the specification of the relevant ASHRAE 90.1 Appendix G
Performance Rating Method. Refer to G2.2 for all the details.

2. EE4 is based on DOE 2.1E which I believe it has been tested in
accordance with ASHRAE Standard 140. Similar software include EnergyPro
(actually they are from the same developer).

B where they listed commonly used simulation software. As I mentioned
Energypro which use the same engine as EE4 is listed.

Personally I do not see a problem by using EE4 provided you model 90.1
baseline separately. But I have no experience of submitting a EE4 model to
the USGBC for LEED. The best bet is to seek answer from USGBC directly.

*Best Regards, *
Connect with me and view my   *http://lnkd.in/bqQf52i*

On Tue, Sep 23, 2014 at 6:02 AM, Jones, Christopher <cjones at halsall.com>

>  This is a question for those familiar with EE4 modeling.  Has anyone
> submitted EE4 models to the USGBC for LEED v4?  Is there a risk that the
> reviewers might have difficulty accepting EE4 models. I would have to
> separately create an EE4 model for the 90.1-2010 baseline case.
> *Christopher Jones**,* P.Eng.
> Tel: 416.644.4226 • Toll Free: 1.888.425.7255 x 527
> ______________________________________________________________________
> NOTICE: This communication and any attachments ("this message") may
> contain confidential information for the sole use of the intended
> recipient(s). Any unauthorized use, disclosure, viewing, copying,
> alteration, dissemination or distribution of, or reliance on this message
> is strictly prohibited. If you have received this message in error, or you
> are not an authorized recipient, please notify the sender immediately by
> replying to this message, delete this message and all copies from your
> e-mail system and destroy any printed copies.
> _______________________________________________
> Bldg-sim mailing list
> http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20140923/cc12ddbb/attachment.htm>

More information about the Bldg-sim mailing list