[EnergyPlus_Support] Trying to use energyplus for thermal transmission

["c_eulitz" <c_eulitz@xxxxxxxx>]

Hallo out there,
I've used energyplus for regular simulation of the thermal condition 
of buildings by defining zones with there surfaces around.

But now I'm trying to use energyplus to calculate the thermal 
transmission through several surfaces:
      Is it possible to create only one wall - construction, built of 
layers from different materials (for example window glas, PVC, air, 
concrete) and start a simulation for this wall with constant 
temperature (23°C) on one side and the outside temperature on the 
other side (by using the weather data)?
The result I need to know is the surface temperature of every layer 
material inside of this wall, to get statements which structure is 
the best for my wall relative to the location built on.

Best regards,

Christian



------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges & Refill Kits for Your HP at Myinks.com
Free shipping on orders $50 or more to the US and Canada.
http://www.c1tracking.com/l.asp?cid=5706&lp=home/hp.asp
http://us.click.yahoo.com/arYXfA/.xWGAA/ySSFAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/