[EnergyPlus_Support] Exceeding maximum iterations problem

["bsiengineer" <arch_engel@xxxxxxxxxxx>]

My simulation is having a problem of exceeding the maximum iterations 
on the HVAC system.  I am simulating two interior rooms served by a 
single-duct VAV reheat system.  This model has previously been run 
successfully with a single-duct constant volume system.  The system 
is electric preheat and reheat, and purchased chilled water cooling, 
so it's fairly simple.

I will upload my file, Iterations.idf, to the 
folder "Problem_Submittals".  Can anyone help me figure out what is 
going wrong?

Thanks!




------------------------ Yahoo! Groups Sponsor --------------------~--> 
Yahoo! Domains - Claim yours for only $14.70
http://us.click.yahoo.com/Z1wmxD/DREIAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/