[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Temperatures setpoints - dual setpoint w/ deadband



Hi, all

this post is, somewhat, the continuation of "Temperature error in
eplus results".

My question is, what factors may influence the setpoints i've defined?

I've tried to do some tests changings some values, redefining
schedules, new temperatures, etc, and every time i run the simulation
the report "Zone/sys Air temp" is always the same, i.e, the zone
temperatures are not what i've specified.

Unless i misunderstanding the concept of dualsetpoints with deadband,i
believe, it's used when i want 2 different temperatures in the same
day (i.e, 21ºC when occupied and 17 when unoccupied - this is for
winter, having other temperatures in the summer) - using a control
type: 4.

Don't know if it helps but i've got to warnigs after the simulation is
done, which are the following:

** Warning ** Invalid Data Found on Weather Data File
************* Invalid Weather Codes, Number of items=   43
** Warning ** Invalid Data Found on Weather Data File
************* Invalid Weather Codes, Number of items=    6

The weather file i'm using is for Lisbon.

The simulation i'm doing is for a validation test of energyplus, but
without having this problem sorted out, i'm stuck...unless that's the
program normal behaviour (which i doubt it).

I've uploaded the file projecto 16.zip, in case it's necessary.

Any help would be apprecciated.

Thnx for reading



 





------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/