[EnergyPlus_Support] about the window air conditioner

["beyangj" <beyangj@xxxxxxxxxxx>]

Dear,
In my residential building mdel, I set the ZONE EQUIPMENT LIST 
object, AIR CONDITIONER:WINDOW:CYCLING and 
COIL:DX:CoolingBypassFactorEmpirical object as follow,

ZONE EQUIPMENT LIST,
    GAB1Equipment,           !- Name
    AIR CONDITIONER:WINDOW:CYCLING,  !- KEY--Zone Equipment Type 1
    GAB1WindAC,              !- Type Name 1
    1,                       !- Cooling Priority
    1;                       !- Heating Priority

AIR CONDITIONER:WINDOW:CYCLING,
    GAB1WindAC,              !- name of window AC unit
    System Available Schedule-B1,  !- availability schedule
    autosize,                !- maximum air flow rate {m3/s}
    autosize,                !- maximum outside air flow rate {m3/s}
    GAB1WindACAirInletNode,  !- air inlet node
    GAB1WindACAirOutletNode, !- air outlet node
    GAB1WindACOAInNode,      !- outside air node
    GAB1WindACExhNode,       !- air relief node
    GAB1WindACOAMixer,       !- outside air mixer name
    GAB1WindACFan,           !- fan name
    GAB1WindACDXCoil,        !- DX cooling coil name
    CycFanCycComp,           !- operation mode
    blow through,            !- fan placement
    0.001,                   !- Cooling Convergence Tolerance
    COIL:DX:CoolingBypassFactorEmpirical;  !- Cooling coil type

COIL:DX:CoolingBypassFactorEmpirical,
    GAB1WindACDXCoil,        !- Coil Name
    System Available Schedule-B1,  !- Availability Schedule
    autosize,                !- Rated Total Cooling Capacity (gross) 
{W}
    autosize,                !- Rated SHR
    3.0,                     !- Rated COP
    autosize,                !- Rated Air Volume Flow Rate {m3/s}
    GAB1WindACFanOutletNode, !- Coil Air Inlet Node
    GAB1WindACAirOutletNode, !- Coil Air Outlet Node
    WindACCoolCapFT,         !- Total Cooling Capacity Modifier 
Curve (function of temperature)
    WindACCoolCapFFF,        !- Total Cooling Capacity Modifier 
Curve (function of flow fraction)
    WindACEIRFT,             !- Energy Input Ratio Modifier Curve 
(function of temperature)
    WindACEIRFFF,            !- Energy Input Ratio Modifier Curve 
(function of flow fraction)
    WindACPLFFPLR,           !- Part Load Fraction Correlation 
(function of part load ratio)
    CycFanCycComp;           !- Supply Air Fan Operation Mode

When the model was run, there was only cooling energy sumption got, 
and there was no heating consumption got. The heating period was set 
from Jan.1 to Feb.28. I wondered there is a window air conditioner 
model like the Residential System(RESYS) in Doe-2.2. There is a 
residential heating and cooling system with a heating coil plus a DX 
cooling-only condensing unit in the EnerguPlus? If so, there is an 
example for this kind of residential heating and cooling system?

Best,

Stewart





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/