[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] no heating load

hello:
     
     Everybody,I simulate a building with E++,but it paused because one 
zone has no heating load.
     This is the error message:
     The design coil load is zero for COIL:Water:SimpleHeating 
ZONEAHUHEATINGCOIL
     An autosize value for UA can not be calculated
    Input a value for UA, change the heating design day, or raise
   the system heating design supply air temperature!
 

        Looking foward your help!






The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/