[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Furnace with High Humidity Control

Hi,

I tried to activate the umidity control in a furnace HeatCool model. I 
added the reheat coil, the humidistat with its schedule and made all 
the modifications to nodes. The file runs successfylly but the zone 
air relative humidity values are the same that I obtain with a furnace 
without humidity control and not the ones inputted in the relative 
humidity schedule.
Could anyone explain me my mistake?
Many thanks.

Enrico








The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/