[EnergyPlus_Support] Run without EP-Launch@NO2

["daiounomiso" <yasutomo45@xxxxxxxxxxx>]

Hello.

I have another question about running EnergyPlus using RunEPlus.bat.

That way was shown in GettingStarted.pdf.

For example, if I will install EnergyPlus into [D:\EnergyPlusV1-2-3],
I could run EnergyPlus by writting as follows in DOS Window.

D:\EnergyPlusV1-2-3>RunEPlus <input_file_name> <weather_file_name>

I understand it and a test is coplete,
but I hope to make a success of another way.
I hope that EnergyPlus can run by writting as follows.

C:\>D:\EnergyPlusV1-2-3>RunEPlus <input_file_name> 
<weather_file_name>

But it brings Fatal Error, and a simulation terminates.

Would you tell me the way if I can make a success of this run
by modifying the batch file and so on?

Thank you in advance.

Tetsuji





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/