[EnergyPlus_Support] moisture simulation with MTF or EMPD

["hatt_hans" <hatt@xxxxxxxxx>]

We would like to do an ep simulation for a magazine which stores 
important documents. To balance the relative humidity in the magazine 
we would like to use clay o calciumsilicat panels at the inside 
surfaces. With these materials we would like to store the moisture from 
the summer to the winter period. Should we use the MTF or EMPD model 
for simulation? How can we get the needed parameters for clay and 
calciumsilicat. In the moisture.idf file we have found already some 
materials, which were very helpful.

Thanks a lot for help.

Hans, Lenum AG






------------------------ Yahoo! Groups Sponsor --------------------~--> 
See what's inside the new Yahoo! Groups email.
http://us.click.yahoo.com/2pRQfA/bOaOAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/