[EnergyPlus_Support] A question on heat pump

["deserteagle_zhou" <yp5166@xxxxxxx>]

Hi,all

I was wondering which field controls the heatpump' cooling/heating operation mode. Or the 
modes are just shifted by the difference between the indoor air temperature and the setpoint?
In my simulation module with a internal zone and four external ones, I put one heatpump per 
zone. I  hope the heatpump in the internal zone can cool the space( wiht large heat gains) in 
the winter while others in outside zones are delivering heat.
 
 Thank you in advance.
 
 John






The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/