[EnergyPlus_Support] Cooling a zone without affecting humidity

["Elmer Morrissey" <elmofuddly@xxxxxxxxx>]

Hello all,

Is there any object in E+ whereby I can cool the zone without
affecting the moisture content in any way. I was hoping to use
something like a chilled beam.

I want to simulate the performance of a heat recovery unit, however
the supply conditions are 26C. Despite this, the zone is actually
maintained at 21C. Is there object that I can use? I tried using a
negative number in the Gains section but it made E+ crash!

Any help would be greatly appreciated. Also, if it can't be done,
could you tell me that too.

Kind regards

-Elmer




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/