[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Re:Parametric envelope studies




Look at the BESTEST and Standard 140 reports that
we produce.   They include results for other tools.
http://www.eere.energy.gov/buildings/energyplus/testing.html

You'll see DOE-2.1E and BLAST... predecessors
of EnergyPlus.  The envelope tests include high and
low mass cases as well as others:
http://www.eere.energy.gov/buildings/energyplus/pdfs/energyplus_ashrae_140_envelope.pdf




                                                                                                                 
                      "Emanuele Naboni"                                                                          
                      <emanuele.naboni@gmail.      To: EnergyPlus_Support@xxxxxxxxxxxxxxx                        
                      com>                         cc: carl.bauer@xxxxxxx                                        
                      Sent by:                     Subject:  Re: [EnergyPlus_Support] Re:Parametric envelope     
                      EnergyPlus_Support@yaho         studies                                                    
                      ogroups.com                                                                                
                                                                                                                 
                                                                                                                 
                      01/08/2007 06:57 PM                                                                        
                      Please respond to                                                                          
                      EnergyPlus_Support                                                                         
                                                                                                                 
                                                                                                                 
                                                                                                                 


Hello,

I am doing a similar work for the Italian context.
Most of the previous studies has been done about envelopes performance were
done with Doe 2, which I think is different then EnergyPlus.
As you already know, ventilation, heat gain protection and dispersion are
the main factors.
Thermal mass: in my studies I am surprise because I was thinking that would
perform better than what simulations says, for example in south of Italy
has
summer benefit giving not more then the 5% benefit on cooling loads
compared
to a light wall having same insulation. I think Doe2.1 is overestimating
the
mass benefit or from another point of view EnergyPlus is minimizing those.
Do anyone have an idea about that?
Thanks
Emanuele

On 1/8/07, Guedi_Capeluto <arrguedi@xxxxxxxxxxxxxxxxx> wrote:
>
> Hello,
>
> You may want to check this work:
>
> Shaviv E. and I. G. Capeluto, 1992. "The Relative Importance of Various
> Geometrical Design Parameters in Hot-Humid Climate", "ASHRAE Trans.",
> Vol.98, AN-92-1-1, Baltimore. (pp. 589-605).
>
> Best regards,
>
> Guedi
>
> Arch. Guedi Capeluto, D.Sc.
> Faculty of Architecture and Town Planning
> Technion - Israel Institute of Technology
> Technion City, Haifa 32000. Israel
> Tel:+972.4.8294012 Fax:+972.4.8294617
>
> email: arrguedi@xxxxxxxxxxxxxxxxx <arrguedi%40tx.technion.ac.il>
> web : <http://tx.technion.ac.il/~arrguedi<
http://tx.technion.ac.il/%7Earrguedi>
> >
> http://tx.technion.ac.il/~arrguedi <http://tx.technion.ac.il/%7Earrguedi>
>
> [Non-text portions of this message have been removed]
>
>
>

--
Emanuele Naboni
+1 (510) 395.7241

1082 Washington St apt.1
San Francisco, CA 94108

[Non-text portions of this message have been removed]








[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/