[EnergyPlus_Support] Confusion about Eplus output.

["lbrtstrs" <alsit303@xxxxxxxxxxx>]

Hi all,

I have a couple of questions regarding Eplus output. I ran an 
example file that is called 1zoneEvapCooler. I added interior and 
extrior lightings, electric equipments and people. I also added 
schedules as needed. I run this file using weather file and design 
days. I also added predefined table reports. I also received and run 
idf files from example file generator to make sure that I installed 
Eplus correctly. When I review the outputs, there are several things 
that I don't understand.

First, in occupant data summary table there are missing units. This 
file only have 1 zone but I received two occupant data summary 
tables for the same zone. Both tables have missing units. When I 
check in the idf file, I only put one command that would produce 
this table. What happens here? I compare the command for the 
predefined table to the idf file from sample file generator and they 
look the same. But in the output table for generated idf file the 
table is complete.  
My second question is about overall hvac air system loads table. The 
heating energy useages in the months of summer are higher than in 
the winter months. This is quite stanger for me. What triggers this? 
Am I missing something here? 

Thank you for your time and help. I appreciate them greatly. 

Sincerely,

Albert Sitorus.       



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/