[EnergyPlus_Support] Window inside temperature

[Sebastian Dietz <sebastian.dietz@xxxxxxxxxxxxxxxxx>]

Hello,

I am currently modeling a simple one Zone building. There is one window 
with double glazing southward and the material properties I used are 
from the EPlus data sets.The simulation is running well, but I get 
inside surface temperature at the window above 80 degrees. Thus the 
output of operative temperature is not correct. I chanced the 
windowglass materials and compared my input with similar models, but the 
temperature is still to high. Has anyone  ideas?
I added my idf file to the web.

Thanks in advance
sebastian




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/