[EnergyPlus_Support] Problem with the file example CondFD1ZonePurchAirAutoSizeWithPCM.idf

["pezpapagallo" <jonzu21@xxxxxxxxxxx>]

Hi, I´ve tried to run this example but there is an error that I 
don´t understand. Could someone run that examplefile and tell me if 
the same thing happens?. Here I include the error:

Program Version,EnergyPlus 2.0.0.025, m/16/aaaa 12:38,IDD_Version 
2.0.0.025
   ************* Beginning Zone Sizing Calculations
   ** Severe  ** Temperature out of bounds (NAN) for 
surface=ZN001:WALL001
   **   ~~~   ** in Zone=RESISTIVE ZONE
   **   ~~~   **  Occurrence info=CHICAGO_IL_USA ANNUAL HEATING 99% 
DESIGN CONDITIONS DB, 01/21 00:00 - 00:00
   **   ~~~   ** A temperature out of bounds problem can be caused 
by several things.  The user
   **   ~~~   ** should check the weather environment, the level of 
internal gains with respect
   **   ~~~   ** to the zone, and the thermal properties of their 
materials among other things.
   **   ~~~   ** A common cause is a building with no thermal mass --
 all materials with
   **   ~~~   ** Regular-R definitions.
   **  Fatal  ** EnergyPlus has exited due to the reason stated above
   ************* Fatal error -- final processing.  More error 
messages may appear.
   ************* Testing Individual Branch Integrity
   ************* All Branches passed integrity testing
   ************* Testing Individual Supply Air Path Integrity
   ************* All Supply Air Paths passed integrity testing
   ************* Testing Individual Return Air Path Integrity
   ************* All Return Air Paths passed integrity testing
   ************* No node connection errors were found.
   ************* EnergyPlus Terminated--Fatal Error Detected. 0 
Warning; 1 Severe Errors; Elapsed Time=00hr 00min  8.64sec

Thank you in advence  



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/